Recent content by DirkDangler

My RV is wired like this through a GFCI in my bathroom then it splits off to the main panel. This has failed twice since I’ve owned my RV (1year). Inverter has built in transfer switch, output and input AC. What can I put in place that is better than the dang RV GFCI ?

For Sale $100 shipping USPS lower 48

I have two 12v SOK batteries that I have in parallel. I also have a separate home made 12v battery that I want to add to the string. All are 100ah, same 12 volts. Can I do this? If so, where is it recommended to sit 1st, middle or last? Thanks in advance

Does anyone Have any input on these inverters? My new RV has a 1000w with a automatic transfer switch. Can't find any reviews. Thanks in advance

Fortune 100Ah Lithium Battery 3.2V 6C Aluminum Encased

Mmmmm... Each cell is 3.2 max... There are 4 cells making a 12v system... So, I'm not sure what your talking about

3.2v per cell, a little over 12v at main pos/neg

3.2v per cell, a little over 12v at main pos/neg

Built a portable 12v Solar power station (cells, bms, mppt and inverter). All was working well, powered down and put it away. 2 mo's later, I go to power up and I get nothing... Cells are at full state of charge, victron no connection, bms no connection. What could be the issue? I'm...

How about discharge low temp?

So 5deg c for low temp protect?

This is my first battery build and I need some help... Everything is working well but I'm a bit confused with the BMS default settings. Should I change? Attached are screen shots of the settings. Thanks so much in advance

Updated box and config.

After reading these comments and the literature I've decided to mount outside the enclosure. Thanks

Is it ok to have my inverter close to this closed cell packing foam?