Recent content by DIYPV

If you set EOD (Setting 12) based on SOC to 20% then the inverter will switch to grid (around 19-20%), and then will switch back to battery after increasing 10% SOC (around 29-30%). Not sure how battery cutoff for setting 11 works, but I read on this forum that the inverter turns back on once...

They are correct, setting 12 EOD will not function correctly (switching to grid) if there is no AC input. What they should have mentioned to answer your question is that setting 11 Cutoff (Voltage or SOC) should will accomplish what you need. I would set both settings 11 and 12 to your...

This video is will show you what to do.

I would go with option 3. It will allow you to bypass solar and revert to grid in the event of system problem. Another advantage would be the ability to adjust circuits based on system capabilities and consumption.

Something like this? I don’t use it, but just happened to see it a couple of days ago. https://a.co/d/adSml4h

Maybe @EG4_Jared @EG4_Jarrett can help you.

Code is: Signature

I had one panel bring down my 10s string, but ended running more wire to utilize the second MPPT on my inverter. Now it’s two 5s strings and only the string with the one shaded panel is affected. I purchase one Tigo Optimizer for this panel to test. I’ll report back with results.

The upgrade program will cost you an additional $750 to upgrade. How much additional did the RMA process cost you to upgrade to a 6000xp?

This is my setup, except for the capacity to charge EV. I only have enough PV and battery for the house. I have thought about buying more batteries, but think an EV with V2H can be utilized instead. Some EV manufacturers offering free charging for a year or two so this could be an added benefit.

Is there a way to turn off WiFi SSID broadcasting?

Maybe @EG4_Jared @EG4_Jarrett can help you.

My panels are all rated identically and angled exactly the same. I recently split my 10s string into two 5s configuration using two MPPTs and it’s making way more power. Reason behind my decision was shading. Before splitting, the whole string would get dragged down, but now only half will...

Not sure who you’re referring to, but I’m sure she can resolve the situation like this thread. They fully credited the 6500’s due to flicker. Post in thread 'Problems with EG4 6500 Inverters and Signature Solar's refund policy on defective equipment'...

Now that’s great customer service!