so I have some aliexpress express cells and of course even after top balancing they quickly like to get out of balance...
neither the daly or overkill solar BMS in "balance" mode does anything useful.
with cells out of balance by about 130mv I let the bms do its balance thing for a few days...
order enough eve 280Ah cells for another 24v pack from @Amy Zheng and the packaging was fantastic!!!
They did not try to overpack a box with a bunch of cells and see how much tossing they can withstand; just 2 cells per box, very well packaged in perfect fit foam shells; boxes nicely taped up...
unless you like gambling of course hehe
ordered 8 - 280AH cells for $850 and after a few months they arrived. packing was ok, however, several cells were pregnant by 6mm or more, still I tested all 8 of them using a battery capacity tester, fluke meters, ISDT chargers (calibrated), etc. at a...
finally after months of searching I found "real" pure nickel 32650/32700 (4P)spot weld strips.
I purchased many 2P and 3P strips from stores on ebay, and aliexpress, everyone that said pure nickel turned out to be, you guessed it, plated steel. (some stores offered refunds when I showed their...
I did a search and nothing turned up. I have had lead acid batteries swell on the sides before but never the top terminals.
These are duracell deep cycle 6v 215Ah golf cart batteries, I have four in series.
I have been working on getting a lifepo4 battery bank to replace them but the wait/delays...
I have the daly smart bms 8s, 100amp plugged into the computer and the program is showing me what is going on(or so I thought).
I was charging the 8S pack at 18amps, cell high voltage set to 3.6, low set to 3.0, balance set to start at 3.5v...all seems well.
So I leave it for an hour, come back...
I am moving some items to a no-wifi android tablet(no internet, just bluetooth) and the software would not install without access to my location and android location services enabled.
Are there any version of this that run standalone and do not need "location" services???
"or is that a...
All my other BMS units before discovering overkillsolar just have the cables soldered in.
Now that I have gotten a BMS with the terminal blocks, well, I like them and want to switch over; probably a nightmare to solder hehe
I Looked on amazon and ebay and did not find these M6 terminal blocks...