drps10

Can we get push notifications also? If we know when grid fails, or draw exceeds xxx or anything else you can come up with. Also, I...

Emporia for my Mitsubishi heat pump. Make sure you have have it on the right conductor if you use only 1 CT. One leg pulls a small...

I am wanting it higher. I was able to search on this forum and found the work around. I am now using volts instead of SOC to get it...

my current set up is mainly for house UPS, so hopefully intermittent. Because the AIO is nominally OFF, it's turned ON by the external...

The fuse picture i posted was just an answer to the "what is a meltfuse" question. The exact fuse was a mega 48v, 300 A. The insurance...

Wow, that is low. I might have to look into that!

It won’t switch over if you disable this. I tried to leave seamless switch enabled but that help any. So it looks like we have to accept...

Thanks for that information also!

@shvm thanks for the response and taking the time to post that picture. I looked into what @EZPZ said and I believe he is correct. I...

I have another thread with some issues, but no one has chimed in. I called Tech and we are trying to figure things out. After an hr with...

New issue: E009 something with the battery. Was trying to make sure everything was set correctly for the battery, cycled the battery...

Haven’t removed the plastic off the screen yet, but it is running on the grid, but in a discharge state all the time. I flipped the...

@EG4_Jared or anyone else have an idea?

Still trying to figure this out with no input yet. It charged (with quick charge) to about 96% last night than it ran down to 90% and...

Kind of figured out the issue. It was at the On-grid- cut off%. Increased to 90% and when the battery got that low it went back to grid...