You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
D
After the great feedback here is my design.
I have 2 questions do I need an Earth rod for the solar panels.
And the question I cannot...
-
D
Output of 40amp breaker feeds the AIO.
AIO feeds the CU.
No need for transfer switch. But, if grid goes down, so does your CU.
However...
-
D
I think what your saying is I could use the output of the 40amp breaker to feed the main CU so split the main CU busbar into 2 so some...
-
D
Thanks a lot for the feedback!
To summarise I should add the following:
A DC isolator between panels and AIO
A plug or switch between...
-
D
Can you export to the grid? If so:
Grid connected inverter
40 amp line goes to the grid input.
Limit grid input/export to 30 amps (80%...
-
D
An A-Typical installation will have the following:
Solar Array to a Combiner (usually with each string to a breaker).
Many jurisdictions...
-
D
Thanks a lot for the feedback!
To summarise I should add the following:
A DC isolator between panels and AIO
A plug or switch between...
-
D
This is my first attempt at my design for my garage and I have some questions.
I am looking for advice on how to get power back to the...
-
D
Hello Im looking at puting solar panels on my garage to power my garage consumer unit here is my original design. should I add a DC...
-
Loading…
-
Loading…
-
Loading…
-
Loading…