Recent content by extrafu

Why not get a 36V charge controller and inverter? There are plenty of options out there for them. Looks to me a lot more simple than toying around with those batteries.

@hwy17 So you haven't had the chance to verify if it was shown using v1.16? I might not care at all about that setting anyway. I read that closed-loop communications is only possible using an XW Pro. I'll likely use my Raspberry PI to read settings from the JK BMS and perform some actions on my...

@hwy17 LMK if it's better with v1.16 and LMK what's your configured battery for your XW+. Thanks!

No I haven't tried v1.17 - I'm curious if that setting appeared in v1.17 or if it appears when you select the Li-Ion battery type from the XW+ settings. I guess I'll know more when I start messing around things when I build the new battery - but it'll only be in a few weeks from now.

I guess it's because your battery type in your XW+ settings is Li-Ion? Mine is still set to "custom" (I am still using my FLA batteries, soon to be replaced with customer LiFePO4 build).

@hwy17 Out of curiosity, with v1.17, do you see BMS settings when you go in Devices, under "Other Devices"? I see nothing on my end with v1.16.

@hwy17 I've just called Schneider. They said that when using an XW+, we should stick with v1.14 of the InsightHome gateway. Mine came with v1.16 and I haven't experienced issues - although I haven't tried to perform any configuration changes on my XW+ from the InsightHome. Schneider told me...

@hwy17 Was it on InsightHome v1.14..16 or an higher version? I upgraded my XW+ to 2.07.00bn4 from a Combox many months ago but as mentioned in an other thread, Schneider does not recommend upgrading the InsightHome after v1.16. I'll call them this week to know a bit more because I would be...

@hwy17 How did you brick your XW+ and what sort of Xanbus issues were you having? I'm curious because I also have a XW+ with an InsightHome (running v1.16). Thanks!

@hwy7 From the release notes it only mentions that starting v1.17 it isn't recommend to upgrade so at least you should be fine with v1.16. I'm running that version and all is good. On a side note, anyone thinking that putting those Operating / Standby buttons on the Devices screen is plain...

I'm also fully off-grid with a XW+ and the reason I am interested in upgrading or keeping up with batteries is the potential support/integration with the new JK Inverter BMS.

@hwy17 Thanks! Looks like you are using an unreleased version since the latest available from the Schneider website is v1.18-bn41!

Yep, when you have a moment, if you don't mind let me know which version you use. It looks like they added a warning on XW+ usage in v1.17 and v1.18 - maybe they'll remove it in an upcoming version 🤷‍♂️

@dougbert I think the InsightHome gateway is more the successor of the Combox. The literature of the InsightHome gateway lists the XW+ as a Xanbus-supported devices. I basically replaced by Combox (but still have it) so that I would have access again to InsightCloud. It used to work with the...

@hogback Thanks for your answer. As for the JK BMS inverter features, unsure yet - I haven't investigated in details what could be done. Ideally, SOC to adjust my AGS's start/stop SOC levels.