Recent content by glowworm238

Thanks, The plug is a 15A that came on the trailer when I bought it, I like that it doesn't take much room inside or out. I used the same brand for the the exterior plug off the inverter so it would match. Here is what came installed for the input side Here. And this is the one I added for the...

I have a Tundra and the "temperature compensating" was causing issues charging my AGM due to the constant low voltage. There are a lot of threads on the Tundra forums with people that have the same issue, some people were actually putting there truck on a charger every night to top the battery...

Thank you for the compliment! I was able to get test it out at Big Bend over New Years. I did find a few Items that I will need to add to make it better, no changes for now to any of my electronics. I just need to make a cabinet for clothes instead of the multiple bins I used and then a pullout...

Midnight Solar Baby Box for SCC input and output and main 24V power distribution 120V In and out circuit breakers for the inverter. The output then goes to the AGFCI before heading to the front and exterior outlets Led lights mounted under rear shelves Added an exterior 120V plug View...

Hole for AM Solar C-Box I used a 1" metal conduit to allow for future wiring changes I used the Zamp quick disconnect plugs for each exterior light to allow for easy removal in the future. I ran a larger 10Ga wire to the distro block for the ground for the lights, the 3 smaller gauge wire...

Here are some of the build photo's from my first trailer build. It is a 2020 Runaway 6'X8' Venturist. I bought it last March and due to the current events had plenty of time to build it. Its comes as an empty shell with 1 Shelf and a small window A/C that uses ~ 365W max. I built the interior...