diy solar

diy solar
G
Reaction score
4

Latest activity Postings About Most reacted threads Most reacted posts

    • G
      GuyS replied to the thread Jk bms balancing issues.
      I did a top balance with all cells getting to 3.63v using a power pack, rebuilt and plugged into bms, shunt and inverter and within...
    • G
      GuyS replied to the thread Jk bms balancing issues.
      So you wouldn't worry about 0.5v difference between cells? Bms says its pulled 280ah at this stage from a 320ah battery. Unless the...
    • G
      GuyS replied to the thread Jk bms balancing issues.
      I'm not usually I only turned it on to bring that one back in line on this one occasion as the differences were large and I was worried...
    • G
      GuyS replied to the thread Jk bms balancing issues.
      I turned the battery off when I spotted it. At that point it was 280ah out of 320ah
    • G
      GuyS replied to the thread Jk bms balancing issues.
      Yes correct. Location is negligible as they are all together inside (so temp is always room temp) yes positive cable output is from cell...
    • G
      GuyS replied to the thread Jk bms balancing issues.
      All the wires and connectors are new and batteries are inside so no oxide at all.
    • G
      GuyS replied to the thread Jk bms balancing issues.
      • Screenshot_20240115_193937_BMS.jpg
    • G
      GuyS replied to the thread Jk bms balancing issues.
      Connection was and is good. Have taken apart to top balance to reassemble and same issue. This is the first cycle after top balance and...
    • G
      GuyS replied to the thread Jk bms balancing issues.
      No, only happened because that one cell
    • G
      GuyS replied to the thread Jk bms balancing issues.
      So after 3 days of top balancing and moving cells. Used today for the first time and did the same thing. 0.005 difference at 3.63v all...
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top