I use a Wilson amplifier and a Yagi 14dbi way up high. Its a PITA to find a tower sometimes while overlanding. I have a lot of experience finding signal and SpaceX Starlink changed everything.
Its a V1 DIY pack and I'm on the 3rd BMS I've had for it. I did have proper connectors/terminators, but they went back with the wire when I returned the last JBD BMS.
I'm going to re-design the box so that the inverter can be mounted to it vertically as well as mounting 12V cigarette lighter...
That was voltage at the cells only. I tried measuring the voltage at B- and it reads 13.1V. The measurement at P- shows 6.7V so it sounds like the BMS is stuck off or broken?
I had tried disconnecting the balance wire plug as well as the power switch wire plug.
Also tried disconnecting the B- and then connected the balance leads then hit the power button and no lights or sounds at all. Also tried touching a wire to B- and P- and turning it on. I checked the voltage...
I had the JK 200A 1A BMS working while overlanding but when I got home the BMS won't turn on. I might have disconnected one red wire from the last positive end and reconnected it. Would that kill the entire BMS? I tried disconnecting and reconnecting the wire plugs, pushing the power button...
I use the Miady 16ah for my Engel refrigerator. Its been working flawlessly for 3 years. Its super light, small and portable. I use a 2A charger for it and it can take a good 4hrs to fully charge it from empty. I have no idea how many cycles it has, probably in the hundreds by now. On the...