Hi all, I need your help! Problem is Pylontech US5000 battery during discharge constant tone alarm sounds with all lights flashing. Solar Assistant shows 0 Watts, 61% state of charge, highest/lowest cell 3.3v. This has happened around 5 times, usually with a slightly increased load of about 12...
I have 2 x 11 kw off grid inverters installed in parallel in UK, with 6 Pylontech US5000. These are single phase, and initially were setup without PV, and monitored using Solar Assistant. They were setup to run at 230v single phase, and were running just fine charging at night and discharging in...