Joe Gleason

Success! Six Canadian Solar 390W panels in series into PV1 of the inverter. Six EG4 rack mount batteries hooked up to inverter along...

Hey Ubby thanks for asking this! I ran into the same thing - everything connected? great now update the firmware. I mean, having a...

Today I setup a temporary ground mount for six solar panels. I need to finish the cable runs to the inverter and with any luck I can...

Hmmm...I have it there to prevent grid export. Pretty sure it needs to be between the meter and the main panel breaker. I'm fairly...

What is your hesitation about using the inverter as a passthrough and running everything on the inverter, not just critical loads? You...

I would keep in mind that if you were wanting to sell back to the grid at any point, you would be limited to the 70A breaker.

Thanks Jared. No plans to sell back. I'll be zero export which needs the CTs between my main and the meter. The 70A is plenty in my...

Hi Jason, no real hesitation. I was looking for a quick way to get up and running without having to deal with the power company coming...

I'm installing an 18kpv with a rack of six EG4 batteries. My house power comes to a meter and that feeds straight into my Main Load...

I'm running off a critical loads subpanel with a 70a backfeed breaker. During periods of time with no solar or battery support, it means...

i think there is room for more