Recent content by Joehebbo

I know it is so much spoken about… but , i want to know something if u want over paneling to reach Maximum of ur pv input mopt limit wont let you could we make 1 serie of mppt and the second mppt parallel so u can have max voltage max amps? Or h can in each mppt has same time series and parallel...

So what you mean that If i checked my battery screen their s no place for 2times or 3 times … empty the battery or any scale to find out how many time we fill and empty it

I am thinking as long we have bms on a lifepo4 lithium battery it gives u voltage by cell temp and many many details can it gives you how many cycle u did or how many time u empty it and refill any idea ? Or any settings in it we can find out?

Isc max is 28 Ad + 28 Ad not mentioned any voltage

Yeah 49.6 my fault

Their s a pic in the comments i attached again data sheet

Why not use 6 in series and anothe 6 in series and then combine them ++ and - - and then put them on one mppt it worse with me and if want add more panels can make more panels but in parallel like 7 in series and 7 or 8 in parallel doesn t work?

The The deye 8kw has voc 370vdc(125Vdc 500Vdc) why they use such numbers and the mppt is 125vdc 425 vdc any himt where s the limit

50hz or 220 volt of ac in my country

Ok i het the deye mentionef the voltage 370Vdc (125 vdc 500 vdc) why all that .. is it 370 or 500

Ok i ll forget about the watts … voc is pv input voltage 370 vdc ( 125 vdc 500 vdc) which one should i follow 370 or 500 the max

What w What would happen if u reach the maximum does the inverter takes only the 10400w as it mentioned ? I heard many times no problem if you overpass ur W but don’t pass ur voltage but sure their is % you can not pass it… and another video i saw about australia they aloud to trespass by 33%...

This is the deye data sheet and my solar panel data

Dear forum, I do have 8kw inverter deye with : voc of 370Vdc(125Vdc 500Vdc) and mppt 150vdc 425 Vdc and Max isc 28Adc + 28Adc and Max input power 10400 W The question is as long it is 8kw mean 8000w why it mentioned 10.4kw max can i reach that or exceed it? Second which should i choose 425...

Yeah that s what i am doing but the point here is i shouldn't reach 500 v i should stay under it for safety right? i can go 9 x 49.6 v Voc par panel 446 volt still under 500 volt the input voltage but i have the MPPT input should be under 425 so i have to go back to 8 x 49.6 =396 V