Most reacted threads

(4) 415 watt Canadia solar panels (2) 150/35 victron controllers (1) 75/15 victron controller serving as dc/dc converter (2) litime 100ah trolling motor batteries in series

3000 watt 24v rich solar inverter, 2x 100ah 12v litime trolling motor batteries in series. 15,000btu AC unit. All components around 1 month old. I've been able to run AC off inverter before, but now I can't. I know a soft start could fix situation, but given my inverter has 6000 watt surge...

Maybe I'm overthinking this. I have my travel trailer setup with a 24v lifepo4 battery bank connected to solar and inverter. I use a victron 75/15 as a dc dc converter to charge my single 12v SLA that runs the 12v system. My question is in an effort to maximize solar efficiency and limit the...

I'm being indecisive and could use some advice. I have my panels mounted and wired in 2 series arrays (4x 415watt panels), I have a 3000 watt renogy inverter, and 2 litime 100ah tm batteries in parallel. 2x victron 100/50 controllers are en route. So my conundrum is that the chargers won't get...

Budget is a big consideration because I would much rather be putting money into expanding my 24 volt battery bank. I currently have 100ah of 24 volt. I have a 15 amp solar charge controller charging my current SLA with the 24 volt system as the source. It's an RV so I need the 12 volt to run the...

Question is: did I ground my inverter correctly or would I be better off not grounding since it's a mobile RV? I have a 24v battery bank and inverter plus 12v system. I grounded everything to frame (12v and 24v charge controllers + 24v inverter). I'm not really sure what it means to be bonded...