Most reacted threads

Hello everyone, So I've successfully wired together my own DIY generator to power various items in a garage as needed. I wanted to take it a step further and buy a 12v 5000watt Giandel inverter and supply 120v to a sub panel to power my workshop in my backyard. Is that possible? I was thinking...

Hello I'm new at this but If I'm making a DIY solar system, not mounted to an RV am I able to use a negative busbar or would I still need to have a copper rod going into the ground? The array is 200 watts and will be station in my backyard on my shed. The inverter, SSC and wiring would be...

Hello everyone, I wanted to ask if I have a busbar that my positives are attached too, and a negative which my negative wires are attached to am I able to attach the ground wire of the inverter and solar charge controller to the ground of the dc fuse box, as long as the dc fuse box has a...

Hello All, So I'm in the process of purchasing all the components needed for a 400w system I plan on building. I want to know if I am able to use 24v solar panels(the solar charge controller can handle the watts and it's under the VOC) to charge a 12v LiPho Battery?

Hello All, So I wanted to ask if running a 2200 watt inverter the fuse size calculation I'm getting is 230, but I can only find 250. Would that be safe with a larger wire such 0 gauge? Also when making any kind of updates such as adding panels, or batteries do I unhook the panels from the solar...

Hello, If I wanted to put a mini dc circuit in between my 12.8v 200 ah lithium batter and my 2200 watt inverter how would I go about sizing that? Doing the calculations I would need roughly 230amp to protect the inverter but I can only find 63a dc mini breakers? I believe I'm doing the equation...

Hello Everyone, So I'm having an issue charging my battery over 13.9V. I've programed my solar charge controller to the parameters listed fo the batter per the vendor, there seems to be adequate voltage coming from the panels and I feel confident I've over sized the wire as well to prevent any...

Hello Everyone, Is it possible to run a standard washer/dryer on a 12v system if the bank and inverter can support it?