Recent content by Mac6792

Did you ever get this sorted out? I recently bought one of these. Tested it yesterday and it ran great. I came down today and noticed the ac breaker feeding it's outlet had popped. Ive been unable to get it working since. Red light only. I've removed it from the battery to reset the...

James - Thanks for the call and the follow-up on the forum explaining things. It's precisely that kind of customer service that breeds repeat business - Myself included

Thanks - Done

yeah - Mine Says EG4 - on the front and top, has dual Posts and No LCD or circuit Breaker. I didn't expect it to have an LCD but I did expect it to have a circuit breaker. It looks just like the OPs pictures but without the LCD One ear was damaged which was really odd as there was no...

I received a 24V EG4 LL in late August Early September that had the dual Posts, No LCD and No breaker. It doesn't (didn't) match anything on their website. I also had damage from shipping and contacted them according to their guidelines. I tried numerous times get someone from Signature...

Sounds like you fried your solar charger controller. Both the the pv and batteries connect to it. Easy board swap. Literally 20 minutes. Have you confirmed your inverter is fine by running loads via shore power through it? As a poster above said there are fuses in the system that you should...

Yes you can do this. In fact there is a notch on the bus bar where you cut it in half. Cut more material off so that there is an actual space. I've found if you don't they may touch when you put the plastic cover on over the breakers. Bear in mind you now have two circuits, both requiring...

"scheduled the pickup between 9AM-and 4PM" I wouldn't call that scheduling a pickup.. More like wait around all day and see if they show

I use a 30 amp ac midnight solar din rail mount fuse in a baby box https://www.altestore.com/store/enclosures-electrical-safety/electrical-enclosures/disconnectload-enclosures/ac-andor-dc/midnite-solar-babybox-4-slot-ac-or-dc-breaker-panel-p4480/...

Schmism is correct in that the settings you're referring to are what is being used to power the loads. The setting you have SBU is what I use and works most predictably. The Sun comes up - loads are powered by sun, exceed the capacity of solar and battery will fill the gap. Oonce the sun goes...

Manual is here https://diysolarforum.com/resources/mpp-solar-lv2424-user-manual.66/

Batterycablesusa has flat rate shipping. Like 4 bucks

Batterycablesusa.com

Yes but in your post above one battery is 29v and the other is 26v. If that is in fact the case that's a no go. They should be balanced

I'd try that. The first pic you posted is what my display looks like at dusk just as the voltage drops low enough to stop producing power. It can click on an off for about 10 minutes then the pv array icon disappears completely