marbella

I use shelly Em for automatic overload cut off from low priority consumer

You need to change everything to one phase and run 2 or 3 or even more growatt parallel

I recommend changing your house to one fase if you are under 15kVA as the asymmetric load is no problem for your provider but for your...

Interesting

My 5kW Must Inverter is already broken and for sale, or maybe someone can fix it for me small priced? You can come for a holiday and do...

I have a similar problem, I can draw maximum 3.5kVA from Line, (smartmeter with power limiter, )my 2 SPF provide 10kVA and we have...

If I'm not mistaken, it's just jumper wires from input terminals to output terminals. If that's correct, you can just use the output...

it always will be zero export as an off grid inverter and can run the house with no power line from outside as long as battery or solar...

yes I run 10kVA house with 2 spf5000es and 20kWh Lifepo4 and generate up to 50kWh with load management , zero injection too much...

why you don't link your video over that I already have seen?

I have a rather new pylontec that does not switch on, neither in the array nor single. It still has 48.5V charge that I can measure...

hello , I know it s 2 years gone but I still have this Problem, I am 62 and started with Visual Studio Code and platform IO and Github...

That cannot be switching at 40 or 60% SOC 🥴

So you run it as UTI and when it cries for power you close your mains input relay? Cool idea! Mine is newer version 114 and runs good on SBU

yes, since last year I use the dry contacts to connect and disconnect grid to the inverter as the old version 067 and below have issues...

What about controlling the load of my heaters with SSR & dry contact? Or the dry contact of my batteries? After wasting hundred hours...

Hello everybody, please HELP!!! I run 2 Growatt spf5000es with 3 Pylontech US3000 TAB since several month without ever rebooting them...