Recent content by mesia

Send it back to warranty! Are you on our group (telegram), have you already asked there? If not join us the link is older posts. If you are not on the group i think we have a colegue with the same issue on the group.

Here you go some new info on this batteries. Be aware that this info is not present anywhere. Keep your batteries in the optimum range of temperature!

Found the issue the bms sends to the invertor that the recomanded current should be 5A. Insane! I have already contacted pytes. If you see slow charge and you know that you have power for charging more, go to console do login debug and after do pwrsys and see recomended current charge. After a...

I have another issue with the batteries. They are now charging around 0.8 Amps if i reset them for around 5 min i get 11 Amps or anything more then 0.8 but after a while they go back to that value. They have the same slow rate of charge even when charging from the grid

I would not recomend messing with the values!

i`ve created a telegram group for this batteries https://t.me/+WqsIOL-YF1k0YjE0

You will not get them at that price. They will redirect you to european sellers.

Hi Christian, sorry i did not publish anywhere,i`ve made it work but i had to leave that location and it got left there. When i will go back i will try to put the schematic here.

Have you reset the batteries after update? Let's talk on whatsupp

This is a small amount of graphs. If you are intrested on sommething in special i could have it! Look at charge and discharge. 1 and 2 are bougth together and 3 and 4 together.

Hi Christian, i`m using the rs232 with a ttl to usb module conected on tx and rx of esp8266. I`m reading the info from the master battery and sending all the info to my smart home. /* As info */ For the moment i`m still having the issues with the batteries, pytes (DLG) promised replacement but...

Great video. thnks!

$2,670.00 it`s a good price? So they leave china with a price of 1200 usd and double and more it`s a good deal? We are not here to see commercials!

I have made a small device with an esp8266 to read the data and send it to my SMH (SmartHome). I just finished the electronics and 80% of the codding. Similar to WifiShine. I will let you know when it`s done!

Do you have any servers? Do you have cacti installed? Should i just give you a python script that sends data to my servers? I need more info as it requires some linux/servers/scripts etc.. Or better should i create a general server where you guys cand send data?