Recent content by mikehave

thanks again for your help, according to the manual LVR = low voltage re-connect. The battery voltage is always 12.67v, whether connected to the controller or not, and whether under load via the controller or not. When the led lights are connected directly to the battery, they work ok. I...

Thanks for your replies, I will do some tests as you suggest and report back. When I plugged it all together initially I noticed the charger didn’t boot up when I connected the battery (before the controller) so the controller or battery look suspect. I will try led lights direct from battery.

Ok thanks, the solar charger has these voltage settings, as defaults: charging voltage regulation: 14.4v floating charge: 13.7v lvr: 12.0v lvd: 10.7v it detected the battery as...

Hi, Eco worthy 100w panel, Eco worthy 30A controller, Ultramax NP38-12 38ah deep cycle battery. I’m trying to power a 9.6w led light string. My problem is that the system goes onto E01 error very quickly, cutting the load output, E01 indicating low battery voltage. Seems like the controller is...