Mof

Video here of someone testing the balancer: I noticed on the Watts247 website they say the have a Bluetooth enabled version...

I've got the one with the integrated voltmeter. It works pretty well on my 12v lifepo4's in series. Without it, the batteries would...

Search this site, you'll find dozens and dozens of posts about the HC02.

HA02 balancer (4 batteries) works well for me with 2S2P 12V LiFePO4 batteries. You can find them on Amazon, Aliexpress, etc. Specs say...

Nevermind, I see they were sold to "Big Battery ".

Found this text in the Enersys(owner of Outback) 10Q filing with the SEC from Nov 8th. "On November 8, 2023, the Company's Board of...

Exceeding VOC+hyperVOC on the PV input is a way to blow the FETs. I understand this can happen to wind and hydro users if they don't...

In my case, (a cheap secondhand as-is Classic 150) the PV voltage being dragged down to 0v was a result of a few shorted FETs. $2.50...

This guy changed them on a 250.

The FETs arrived yesterday from Digikey, the shorted ones were replaced. PV input input is working again. For anybody planning...

FWIW: for those that don’t want to repair them themselves. Midnite has a pretty quick turnaround on that service. I don’t recall the...

FETs are on order. Will keep you posted. They are a bugger to get out.

Old thread, but will post this for the benefit of anyone who stumbles across it. My Classic 150 has 8 of the following...

Using an X-Acto knife, it is possible to shave off the ridges on the top of a PH2.0 connector and have it fit in the JBD UART port. I...

Yes! Done.