Most reacted posts

Thank you. i did it and it worked

Okay. I'll activate it and see what happens. I'll let you know tomorrow. Thank you

I put it enable and it worked. Thank you.

That's why we're here to help each other.

Thanks

Hello. Someone has the original version of the Megarevo 8kw. The one that brings from the factory. Thanks in advance.

With w11 it doesn't work. I was able to do it with another computer that has W10. Thank you. The problem I have is that it is giving me false readings in the app.

Greetings who has the new version that can me of the megarevo 8k that can provide it. Thank you

If it works according to those instructions

I don't look at the graphs much. As they asked me, I gave it to them. I base myself on the physical, on the counter the numbers go backwards. And the multimeter.

This is what it gives. It says there are no files

look at the arrows in figure 2

is reading well. What happens is that the anti-reverse is disabled, however it wants, it sends the current to the counter and the count is in reverse. On the counter physically. I don't get carried away by the graph. Only physically on the counter.

No update has been done either. It's from the factory.

Make sure setting 15 is lower then setting 12, and that setting 12 is lower than setting 4. Setting 4 must be lower than setting 14. If that's not the case, you may not be able to adjust setting 4." That worked for me. I hope it works for you.

The CTs are in the inverter. Inside

I did what you told me but still the same. only added the DSP that was in V 0.00.0

I got a computer with W10 and it worked. But I want to see on the cell phone and it says it's partially disconnected. Thanks.

Thanks

I did what you told me but still the same. only added the DSP: V 1.04.9 before it was V 0.00.0

I'm using Windows 11. I don't know if that has anything to do with it.

Hello, I have a problem srne 8kw I put the batteries in L16 (lithium) but setting #4 does not let me change. They are not connected to the communication cable. I can change the other parameters except #4. Has anyone of you had this problem and if so, how could you solve it? Thanks in advance.

Hello, I have a problem srne 8kw I put the batteries in L16 (lithium) but setting #4 does not let me change. They are not connected to the communication cable. I can change the other parameters except #4. Has anyone of you had this problem and if so, how could you solve it? Thanks in advance.

Hello, I have a problem srne 8kw I put the batteries in L16 (lithium) but setting #4 does not let me change. They are not connected to the communication cable. I can change the other parameters except #4. Has anyone of you had this problem and if so, how could you solve it? Thanks in...

Hello. Is there someone who can help me and explain. My megarevo 8k brought this program from the factory and I turned it off so that it would not export. But it continues exporting even if the disable option is present. Is there something else I have to do to make it not export. Thanks in...

Hello. Is there someone who can help me and explain. My megarevo 8k brought this program from the factory and I turned it off so that it would not export. But it continues exporting even if the disable option is present. Is there something else I have to do to make it not export. Thanks in...

The CTs are the arrow towards the grip. No factory update has been done.

It's from the factory. and check the counter and if it is running backwards

Here the CT photo