Recent content by parkerd

Adding batteries

Just posting this china coffee shop!

Im in the same issue....i cant log into app

Tech support helped...got setting corrected to 300 amps input from batteries. Make sure your on labtop or computer to set these settings.

Yes ill look again....but its in lead acid right now because im dealing with comm

Im going to be home in an hour ill post when i look

Got to be a setting

Yes you see the graph it spikes up with the demand....i have 50 panels across the system its clipping all inverters together at 140amp

Clipping all day at 3000 watts

Cant go any higher ......they all are set to 140

THats just the master

Tech on fri put the system on lead acid and its running off voltage....but i have 7 lifepower and a 14 kwh 280 ah 48 volt pack added also another 200ah battery.....

Right....but im only getting 140 amps across all inverters together. It is clipping output and pv charge at 140

I have 3 units installed and all 6 strings almost max out but im clipping at140 amps! And all three bypass to grid if load goes over 6000 watts. Tech support is buzy.