Recent content by Pi3.14

Dont believe it.

VAPORWARE no worky, only BT will Show SOC but can't adjust or see anything else, no one has yet (password baloney), also UART usb no nothing on software, go with other BT 100A that works and NTC.

I have yet to see 1 Daly UART usb or BT connection that works and allows parameters to be set, Its vapor ware, the BT requires passcode that noone knows and UART plug doesnt show on SW program, it shows port connection 3 or 6 but no UART connection.

Someone said they can read but can't adjust,not sure.

It be nice if it could work and be able to set parameters on cells

google translate and choose file to translate from there

Seemed to notice when charging at 13.8-14V and 13-14 Amps the highest cell stayed at 3.45 while the lower V cells continued to charge up, maybe this is a way to equalize cell V, w/CC and CV to balance 3.2v cells in 4s series.

USE GOOGLE TRANSLATE TO SEE ENGLISH, its like the PC master, I can connect thru serial port 3/6, but l need to connect thru USB via UART, so UART shows in box, GO TO POST #206 his name is "Ms820", only 3 posts under his...

downloaded it, just gotta get com opened from uart to pc to view, need to know how he got it communicating, its all about uart usb sending info, BT works but only shows SOC and amp draw, so I know BMS is working, just need 4s cell V to show up. Mainly want it to OVER/UNDER cell V protection from...

Where can I get the "Sinowealth BMS tool", trying to use SW, it sees serial port 3/6 but still trying to connect to see data from BMS

SW looks nice with 110a BMS, like the busbar. I open my case so I may add busbar so wires don't move on the battery terminals.

Verify the BMS HIGH/LOW cell V disconnect, some don't even work, don't believe "SPECS" until you see it work.

It seems that just as the LiFepo4 hold same voltage while discharging and then drops fast at end, the charge does same and when a cell reaches 3.65 it charges alot faster and reaches high voltage quickly before other cells have reached 3.65, BMS supposed to cut charge when individual cell...

Also BT connects with DalyBMS android app, shows SOC and currents, but can't set parameters cause requires a password, and its not 123456, I also have NTC cable and will check low temp shutoff works?