plund

Yeah well if i could run it without a battery I wouldn't be here in the first place :) At the moment I don't know what voltage and...

Suppose the battery is in between the SCC and the load. If the battery is kept running around lets say 60-80%, then there will always be...

No. If there is 0A from the solar charger, the load should turn off as well. It should only operate during sunlight. Let say there is 10...

Every load is constant, but there is multiple of them. Plan is to turn them on/off depending on the output from the solar charger. Too...

If bigger batteries was a good option i wouldnt have any problems from the beginning right? Coz that would solve the problem

During normal operation, there will never be too much current available to charge the battery anyways. Guess it could be possible to...

Sure it adds complexity, but need to control multiple dc dc converters as well so expect something like that would be integrated with...

Fair point. Its electrodes for electrolysis. And I have no idea about the minimum on-time at the moment

Well if the controller know it own output, and know the current drawn by the load, it can limit the current right? 100A available, load...

I only want the load to be supplied during sunlight. The load is basically a low ohm resistor. The batteries is not to keep it running...

At this moment, no idea how long "short" is. Need to get it up and running and make some experiments to know this. I guess this is...

Thanks for the reply. I mean in case the load is off and batteries need charge, they will take the full 120A and need to be able to...

Hello! I'm trying to figure out battery choice for my system. The plan is to use a 48v 120A solar charger, with batteries to power a...