rin67630's latest activity

The easiest way would be to use a 12V/24V DC pump with a 12V/24V AC power supply and a 12V/24V nominal (18V/36V peak) solar panel in...

Now the project has got an extensive user manual explaining all steps to realize the project according to your needs: User manual you...

Now the project has got an extensive user manual explaining all steps to realize the project according to your needs: User manual you...

Buying lead-acid batteries, and severely oversizing the lead-acid bank; it lead to the system never being fully charged causing the...

Today I have concentrated on documentation. I made an overview synoptic to facilitate the understanding of what's offered: Currently...

Just a few lines of code more: With the parameter A0_IS_SIMUL, and using a stock Witty ESP8266 board, I have now a light-driven...

Maybe reduce ventilation overnight, so that the batteries would not cool down that much??

Usually, condensation does not happen in ventilated a room, where energy is dissipated.

The remote ESP32 is programmed and I am providing 6 colour screens to display the information gathered and derived from either a Victron...

I will soon describe the Non-Victron vendor-agnostic Smarter_Shunt variant. The material required is very limited: A micro DC-DC...

Sorry, her as PNG:

I have rebuilt my Home Brew Victron Logger, to be less clumsy, it also accepts an optional OLED display: The project is discussed...

Just a remark for those on Windows. If you want a connection with Telnet, don't use the broken Windows' Telnet option, which does not...

For those following this project: Initially, it was ESP8266 only. I am currently rewirting the code to accept ESP32 modules as well. And...

If NTP does not work, one should increase the delay in setup getNTP(); delay(6000); getEpoch(); // writes the Epoch (Numbers of...

Your should replace de.pool.ntp.org with ca.pool.ntp.org if you are in Canada. Tell me if it works reliably.

An ESP32 is not ideal, I haven't actually tested it with the actual code. Hmm why? Is your network wonky? Console1 is a macro defined...

It can't: Serial is busy with the Victron port. You could try with TERM_IS_SOFTSER to check, but Telnet is ways superior.

you are supposed to get the time right: that one in not what you should get... Probably with the right NTP settings?

Yours (in Canada i assume), of course.