Most reacted posts

If you plan to have your solar installation permitted or inspected by local authorities there are very specific requirements for types of equipment you can use. For example, a cheap Chinese inverter isn't UL listed so it won't be allowed. If you don't have it permitted or inspected you can do...

Daly just introduced their 6s BMS for about $12. I also have two Tesla batteries but don't run a BMS (also per Will's initial advice). I'm not entirely sure of the benefits or efficacy of a BMS. We say 6s but that battery is actually 444 cells split into 6 "cells" with 74 batteries each...

A great idea too!

Ouch, no, not right! A 280 amp fuse on a 24v battery will allow for nearly 7000 watts! (If you wanna edit your post real quick I'll edit my quote so that gibberish isn't saved for posterity)

It's MPP's software called Solarpower for their LV2424 inverters. https://www.mppsolar.com/v3/split-phase-lv-series/

It's only going to draw the current it needs. 2400w/120v = 20 amps. That's 20 amps at max load which you probably won't draw all the time. I used a 20 amp breaker on my LV2424 setup. 30 amps breaker is okay but probably oversized for the 10-15 amps you'll draw continuously. You can pull out the...

Pos and negative in correct location? It's hard to read the labels buried like they are in that box. There is also a delay from hitting the switch to it coming on. My first time I was like WTF did I do wrong?

Dupe post