Sennen

The eg4 would take the enphase input on the generator. From the manual

Enphase's overpriced batteries or ac coupling an AIO are your options

Wireway or wiring trough. Local electric suppliers carry them

Is the fuse still 175 degrees?

It's the subtlety of the phrasing current limiter. ANN 35a fuse will blow in about 0.3 seconds at 70 amps, ANL will blow in 10 seconds.

With 2 or more inverters, I think a chargeverter would better suit your generator to directly charge the batteries Rather than pass...

But can your solar assistant run doom?

manual calls for a fused disconnect between solark and grid (diagrams starting at page 47)

I just removed a little of the the heat shrink and used the handily sized holes at top and bottom. This made a better connection for...

For a 12v system, this may be plenty.

PV Pro is offline for me. Flaky since last 2 updates.

DC overvoltage? Is it a single unit faulting or random units? Might need to let that unit balance itself.

Even when it was 30f here, the inverter stayed about 160...

the latest solark update jacked up my whole connectivity. Glad I have Solar Assistant in place to see actuals as the Solark communicator...

You can forego the breaker if you're brave. Can also use a fuse. I prefer to have protection on all circuits with the potential to ignite

Personally I'd recommend something more permanent. https://www.amazon.com/dp/B085HFBLDN as a suggestion for type. You don't have to go...

Check this setting "Max solar power"

That's for the whole day, not any specific time. The daily view shows you 5-10 minute snapshots

This shows a 1 hour gap in the production logging But the daily is correct