-
-
Stepandwolf replied to the thread Help I have an unbalanced 2S3P 24V battery bank..So, you can't use a 6s balancer for 4 or 6 bats in a 3p2s scenario?
-
Stepandwolf reacted to robbob2112's post in the thread Help I have an unbalanced 2S3P 24V battery bank. with
Like.
The problem with that configuration is once you have it wired there is no way to get an independent voltage reading from any of the... -
Stepandwolf replied to the thread Help I have an unbalanced 2S3P 24V battery bank..That last picture is posted on this forum in another topic. Not my configuration but it is exactly how Siekon says to wire it. I just...
-
Stepandwolf reacted to robbob2112's post in the thread Help I have an unbalanced 2S3P 24V battery bank. with Like.
no... You want to make a series of two batteries twice, then just connect the ends and not the middle. What you have there is 2 in...
-
Stepandwolf replied to the thread Help I have an unbalanced 2S3P 24V battery bank..I am just now building 4x100a 24v system. There is space for a 5th and 6th battery. The drawing in the Siekon manual and a build found...
-
-
Stepandwolf reacted to sunsurfer's post in the thread Spot check my off-grid system design with Like.
If you plan on being gone allot, I would get an inverter with lower idle consumption...OR....you could get a separate small inverter...
-
Stepandwolf reacted to tinyt's post in the thread Nets on solar panels? What is going on here? with Like.
In some parts of the world you have to be friendly with your neighbors, even that kind of net will not protect the panels.
-
Stepandwolf replied to the thread Using DIY LiFePO4 Battery With EcoFlow.I did see where you wire one leg to another...there is a YT video out there somewhere.
-
Stepandwolf reacted to Daddy Tanuki's post in the thread Wiring layout challenge :) Help needed! with Like.
a lot of it revolves around the entity making and selling it. in reality almost all welding cable will pass but it boils down to if...
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.I think the only time an inspection would be done is on a grid-tie system. Neither of my setups is grid-tied. I have watched many...
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.Yes, both welding wire. Don't think I have seen DLO even mentioned. Did eventually find some 1/0 for slightly less than 2/0. I did...
-
Stepandwolf reacted to robbob2112's post in the thread Wiring layout challenge :) Help needed! with Like.
Which other wire? Both welding wire? Sometimes these guys have clearance items that are a buck a foot cheaper...
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.was looking at buying more battery wire. I had originally bought 2/0 from Windy Nation. When checking the price for 1/0 I found the...
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.Thanks for all the tips. You are a great resource.
-
Stepandwolf reacted to robbob2112's post in the thread Wiring layout challenge :) Help needed! with Like.
My problem with stacked connections is that the stacked lugs are not as flat as just a lug per... which means a lot of the torque is...
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.With more detail so you guys have more to correct me on :)
-
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.I think there are only 3 stacked connections. The two positive battery connections will be connected with bare wire to the T1 which I...
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.ok guys... I did a merge of Rob's awesome design, changed the batteries, and T2R's input into kind of a merger. Would appreciate...
-
-
Stepandwolf replied to the thread Wiring layout challenge :) Help needed!.Since both of you are WAY over my head, would you, based on the discussion, change the first, less complicated drawing? I think the...
-
Stepandwolf reacted to robbob2112's post in the thread Wiring layout challenge :) Help needed! with Like.
shrug - I dunno then - connecting everything to the chassis ground still leaves it on wheels - unless it is plugged into a pedestal for...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
