Symbioquine

I took his image as a concept and not a actual product to use. The actual product would likely be either pure copper or tin coated pure...

You’re the best! Thanks for the knowledge and helping me get my unit back!

Neutral and Ground should be tied together in ONE place, and only one place. Most equipment has the capability of being that one place...

You can either buy a box that takes the main breaker at the top, or you can use a smaller box and have one of the breakers be the main...

Again, not an electrician - not official "advice" - but here goes... In some scenarios this might be technically okay, but don't do...

I know you can do this, but I think it's cleaner and easier to understand if you have one panel that has the sole purpose of combining...

Yeah, that’s a real mess, rip out all that AC stuff and start over with proper breaker boxes. Not sure you need combiner then main but...

There's also my thread on the subject which has a fair number of datapoints from different size generators and fuel types...

Disclaimer: I'm not an electrician, but I think I'd be inclined to: use a small breaker box as a combiner box to parallel the two...

Not at all Yeah, I didn't "properly" mount my replacement solenoid valve. I probably should, but so far it hasn't seemed to hurt...

I'm glad to hear that I'm not the only one fond of Dremel usefulness.

Yeah, I suspect that it's designed to be backwards compatible (or at least nothing a Dremel tool can't fix :devilish:)...

Thanks, I added one fan blowing through the generator, but it wasn't enough. I will try adding an additional fan on opposite side pull...

It looks like a 12 pin PCIe power connector (obviously, double-check for yourself :geek:) - which would make sense since they used PC...

I don't think we can say that. My understanding is that some early generators have a wire that needs to be broken/disconnected to...

I found this forum looking for information on the Duromax xp9500ih CO monitor. We are trying to use the generator in an aluminum housing...

Incredible. Thanks a million!

Glad to help! (And keep another generator out of the landfill hopefully.) Yeah, I think you're talking about the little cover with the...

Car headlight bulbs, you can shine them on your panels for free electricity !!!!

There are commercial "metal grid" resistance elements, older ones are cast iron, more modern ones stainless steel. These individual cast...