Recent content by TheGreyPaladin

JL Hut I used 6 AWG wire and did not have a problem. I know its more than they suggest but my electrician REALLY suggested 6 AWG.

FYI if this inverter doesn't work for you the Growatt 3000 LVM will handle 150 VOC and up to 80 amps! ;)

Is it possible to do even basic monitoring via Home Assistant of the EG4 3000? I see people buying Solar Assistant and then monitoring that but can you not do basic monitoring of it via MQTT or some such directly in home assistant?

I am asking them to put out a firmware now for a lower threshold of 50% which is still high but more reasonable.

IS there any reason the EG4 3000 needs 60% battery power to start using battery for loads? Thats super high! Thanks!

Comes up as $204.97 for me.

Yep have all that configured.. I use alot of power in the morning and my old Growatt let me set the percentage to set to use battery for loads as low as I want - that way I could use the morning incoming solar for loads and only use the extra to charge the battery - which is what I want. This...

Hey all - just got one of the new EG4 3000 v2 inverters (connected to EG4 LifePower 4 rack battery) and the lowest it will let me set it to use battery power for loads is 60%????? Thats CRAZY high! My old Growatt 3000 you could set it anywhere above the minimum utility power. Is there any way...

Hello! My current system is an Ecoflow Delta Max 2000 connected to (4) SolarEver 410W Panels in a 2S2P config - ea panel is 38.1 VOC, 13 amp so each serial pair is around 75VDC then both strings connected in parallel to the Ecoflow - works like a champ! This first system was a test since I have...