Most reacted threads

I currently have 2 MPP LV5048 s in parallel. I have a 5 ton 2 stage scroll compressor HVAC unit that I only use in stage 1 which is about 3 1/2 ton equivalent. I know the single MPP wont start it so I obtained 2 more to use in parallel . I have only connected one more at this point . I read...

How do you make/cut DIY busbars? I have used cutoff wheels on copper, Miter/cutoff saw on aluminum as well as pipe cutter and then flattened the pipe for smaller projects of both and brass and hacksaw for smaller projects. Sort of a dedicated metal cutoff or bandsaw what have others used ?

I am considering placing some panels facing more East and West to lengthen the Solar Day and use batteries less. I know the inclination should need to be higher and the optimum position may not be due East for instance or Southeast exactly. I can get a pretty good idea of inclination from just...

I have HVAC 240 volt unit . I am thinking about providing its power with a European MPP MG 5048 inverter that I have been using as a battery charger for panels located farther away. ( I am also using MPP LV 5048 for rest of home right no). The inverter has a 240v 60 hz setting available. I...

The big question is whats the lowest temp i can drive a golf cart with these batteries without a heating pad just 3 or 4 times a year ? I have searched for a couple of hours on this subject. I find a lot about when battery heaters come on etc but no exact answer. I realize some extra...

I currently have MPP LV5048 used in split phase. 12,600 was 42 panel 300 watt tillable pv array. I need more wattage available at times and a significant part of the day My consumption is around 7,000 watts in a large home. I currently have 30 kwhr of lithium battery hoping to increase to at...

I have read where some sellers recommend Mounting vertically . First if you mount it vertically which end would be down ? Why would it matter unless it has a physical relay/ contractor or relay to operate a larger contractor for high amp discharge etc. Next if a BMS is capable of Bluetooth...