webbbn

I’m just starting this journey, any chance you are using Python and can share some basic subscription code? I can see parameters with...

The limitation for logging data is most likely due to the communications speed with the inverter. My two options are RS485 at 9600 baud...

What CAN interface are you using? I had similar issues with a raspberry pi hat, so stopped using it, but have not had any issues with...

You shouldn't get any collisions on the CAN bus, or at least not that you care about. The underlying CAN protocol deals with sensing the...

Nice python script, but you need to change "true" to "True" in the above example. I would use asyncio rather than a thread. I use it...

You really need a Phd to understand my electric bill, but, if you ignore all the fixed taxes, fees, and surcharges, they pay me 1/2 the...

Yes. One was intended for an electric cooktop, but we have a gas cooktop, so that circuit is unused (although it is currently the grid...

Okay. So how are a bunch of posts that suggest level-1 chargers are 230/240V any better? You seem to be trying to prove that your...

I didn't say "all", although I suppose one could infer that, but these are consumer devices with a US 120V plug on them. I also wasn't...

Yes, of course, but the post I was responding to was about US split phase. In fact, this whole thread is about US split phase.

EV Chargers don't generate power. They just control the flow of power. AFIK their only purpose is to limit the current that the vehicle...

What charger do you have that doesn't ground properly? My Emporia charger doesn't require neutral, but it does require ground, and, if...

I just logged into my Solarman wifi interface using admin/admin, but it looks like you can change that once you're logged in. Maybe you...

I recently flashed my Vue 2 with ESPHome, and it works very well. I'm not sure you if you can directly use the Vue CTs on the Iotawatt...