Recent content by West Coast Canuck

I have a 16s 2P battery setup 2-16cell packs of 260 ah with a Daly 250 amp BMS on each parallel pack, I am a novice at solar power so learning as I go so there are others can help with technical information but will tell you both the 250 bms work perfect keeping cells balanced, I was going to...

I suggest 250 amp BMS if you use Daly

Sorry these panels are SOLD

Thank you Panels are SOLD

Sorry, don't think there is a way YET. Maybe after the border opens

I have 2 maybe 3 Q- cell, 430w duo panels left over from my order, they are brand new and available for pick up in the Vancouver lower mainland. I am asking exactly what I paid by buying a larger amount. $285.00 Cnd.

Thanks snoobler, for confirming my calculations, I will post a picture of the total system when complete Thanks again

Thank you for you comment Vmp is 41.39v and I see a mistake on my post Panel VOC =49.09 x 4 in series = 196.36, Voltage drop with AWG 10 = 2.24V (not AWG 19) everything still work?

My DIY solar system will consist of - 4strings of 4- 425watt Panels in series. Each string will be wired to the 2 ports on the 2 MPP Solar LV 6548. Each Positive line will have a 20 amp Breaker and will use 10 AWG PV wire. The wire run to the Panels will be 50-70 feet. This is my Idea any...

I am in Canada. Thank you for taking an interest to help me understand this issue, the help I have been given on this form has been un Parallel (no pun intended) thanks again

Ok I am just trying to understand if what i have wired from my 60 amp two pole breaker from the grid is referred to as split Phase(see attached as wired). The LV6548 refers it as One inverter in each Phase, but the Manual page (single page attached) asked for Split 120 or 180 phase diff

Sorry sent the wrong attachments, Give me a moment FilterGuy and I wiil find the right ones

I have 2- mpp Solar Lv6548 wired up in what I think is called Split Phase and think that it is 180 degrees. This is a first build and learning from everyone on this site has been great but being new to solar I am not picking up on all the terms so if anybody can help me with what I have wired to...

Yes I got it 200 amp ANL Fuse, Is it really needed after the bus bar or just good practice, I intend to add it either way

I can't wait to work on solar panel design, want to get batteries and inverter all set up and when the weather is good in the spring start panels, i checked with our local city and they want an engineer to sign of on roof loading and that will go into the engineer in April. I little concerned...