diy solar

diy solar

Most reacted posts

  • Post in thread: Mounting question - how much does pitch matter

    Yes, very true. Also, i mentioned that this is for the design phase. When you get to the real world requirements, dead flat is almost never an option due to dust, leaves, snow etc. In NZ, for offgrid, 10 to 15 degrees is usually the best balance of self cleaning, and best solar collection...
  • Post in thread: LOLs on this controller

    Sad news for everyone on the forum (and members of the public who are not aware of the scam); In typical TradeMe style, it seem that our comedian trader on TradeMe has been shut down, but the scam sellers are still up. Another case of TradeMe shooting the messenger, blessing the scammers.
  • Post in thread: The Neverending Search...

    LDVV - if you are going Growatt, go with the DAH 460w panels x 12 (2 parallel strings of 6) - you get very close to the magic numbers (max Isc, max Voc, max wattage) with that combo of inverter/panels. They are a high-voltage panel (~60v) with low current, so by the time you put 2 strings in...
  • Post in thread: Solar Economy, is it healthy?

    This might be of interest to Australian/NZ installers (but i would expect they already know as it has been discussed very often); AS/NZS 5033:2021 has been updated, removing the mandate for DC isolators to be installed on household solar systems if other safety measures are followed. These...
  • Post in thread: Can I run a 1500 Watt inverter off a 100ah agm deep cycle battery while the vehicle is running?

    Hi Solar_Lex, A great big preemptive welcome to NZ! You said ... "guessing 1500w would really damage a 100ah agm house battery". A 1500w inverter drawing full surge load (3000w) will pull ~250A, so unless your AGM has that kind of CCA (if its actually a starter battery) or a BMS that can do...
  • Post in thread: Why do appliances give power draw in amps it’s so confusing.

    Great write-up @ULR
  • Post in thread: Have I stuffed up this LiFePO4 cell?

    @RLP : Not sure where you are in NZ, but give the guy at roar power a call - he has lent me time on his cell testing machine to check 8 cells on a 24v battery for me, and found a bad cell. He might also have spare cells that might be a match for your cells, as i know they have EVE cells in some...
  • Post in thread: Storing heat in sand?

    @MyK3y - how are you getting on with this project? I have a couple of acquaintances trying similar projects
  • Post in thread: SSC Load Terminals - To use them or not to use them, this is the question ?

    We would almost always use the load terminals in our setups - but our cases are specific; 1 or 2 panels, into a victron controller, 24v LiFePO4 battery, with the load terms powering a passive POE injector into waterproof (carrier grade) ethernet up a pole to power radios, cameras, APs, lights...
Back
Top