Most reacted posts

Each L is 120V. USA power split phase 180. USA is in the title

Coal tanked furnace. just a small fluid pump 120V 2A

Load assist , i didnt know this was a thing thank you!! Yes id like the primary power be from the PV and batterys before the grid. and have zero export. We had a water tank, but it died.. and i had this from the last house sitting around so we used it :D. excess PV should go to the batterys i...

These seem REALLY NICE! Can you suggest a unit for my ideal setup?

we live in an old house, a heat pump anything really isnt an option sadly.. limited space down stairs the other 16wk was around x-mas, so x-mas lights, dual wall oven, electric glass cook top and tvs and coffee and tea maker and a bunch of other stuff being turned on with family at the house...

Vmp is 33.9V Voc is 40.9V and i want minimal loss over the 118 Feet the cable has to travel @ Imp 9.43Amps Isc 10.02A Im useing the higher numbers for the math as i have seen them reach that and then some on higher UV days where i live i have seen a UV of 11+ in the summer, and this makes my...

Mine is asking for a login... there is noting on what the login is...

I mean we dont run the water heater 24/7 lol maybe for like a total of 1 hour per day for showers and stuff, also please read the rest of that it will make since. Thank you! Is cause of the batterys/inverters there is no space left LOL makes since, thank you! this will help make a better...

There woudl also be 1,000AH of 48 batterys. there server rack cells. they can handle upto 100 amps each and there is 10 of them so 1000 amps of current. that should be enough i think?

as crazy that is, as i said before, our AVG usage is only about L1=10A and L2=2A Dont think that will be pulling 1,000 amps on the battery bank. maybe like only 36 amps? so in thought, about 27 hours of run time, enough to make it to morning

Also With the expert power, they also have a nice 48V 100AH server rack battery to go with it. Think this is a good paring for SA?

I have for my own unit, its been 2 weeks still waiting :D Thank you! huge huge help

My new/used pannels have been hooked up on the ground (temp) and they output a wopping 9Amps @ 240.6V The math says i can go the full 118Ft and only lose about 2-3 Volts with 10awg solid copper. Does this seem right?

When things are in stand by waiting for something to happen like turn on. there is a passive usage. Like a TV can use 0.2Amps, auto coffee pot 0.02 amps, your fridge and water heater still have electronics in them measuring temp and waiting. its likely there using about 0.1 Amps each. So even if...

I got mine from aliexpress for $8,961.3 with shipping. yes all 10 they arrived on a pallet. not any more LOL!! it was the tank or solar things. Where there was a tank now sits a wall mouted unit. this freeded up so much space it was crazy! i think you missed the part i said a fue back that i...

So im looking to buy one of these 3 hybrid inverters to start my monster system. but i have NO IDEA what OFFLINE monitoring software for like an old laptop or a rasberryPI.. ANy advice and suggetion swill be wonderfull thank you! I was thinking of " SolarAssistant"? but not to sure.. Here are...

So i have a small hybrid inverter for my garage, works great! 200ah 48v storage. (This is to show i have some knowledge about it) NOTE: My house has 400amp service 200Amps on L1 and 200 amps on L2 Now im planning on doing the house on a hybrid system. We have a power monitor in the breaker...

i ran the numbers for my 118ft of line ill need. and if i use a high voltage and low amps (10 or less) i will only lose 2-3 volts at best. the small the wire the more loss ill have, and the more amps vs voltage i run the loss is even greater like in the 10-30 volt range..

YEA, There is no place that tells you what the login info is..

Maybe this can help you? https://www.amazon.com/dp/B08CK22X3B/?coliid=IROWFB2OEDRW2&colid=2ID1YVE110C28&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it