Recent content by Zorro

lower self consumption? how many watts does our new inverter consume?

Hello Ronny China, please share with us your experience about the SOROTEC REVO II here so that everyone can benefit- check above some questions about such inverter and let us know your feedback !

Hey Mike, thanks a lot for the info. I would be very interested to obtain the software for battery voltage and amps calibration, as I have two batteries connected in parallel (LiFePO4 Sorotech 100A 48V each). I had trouble in calibrating them and I still feel they are not alligned. Would...

No, it would take the overload power from the battery instead

the inverter would not hold on to the high power

I did try two parallel strings 6 by 6 Inverter was not able to endure the high amperage, 28 amperes or so.

well I have a loss factor of 15%, this means the inverter will receive around 448 V max. It is really worth it- specially in the winter, mainly because I have too much shadowing- my voltage drops so much during winter days. In Summer, I also have shadowing but at a less amount than in winter...

I have no idea about it...

Hello, Has anyone tested the maximum PV array voltage that the SOROTEC REVO II can endure? I have a setup of 12 panels (Trinasolar) 545W, with 37.7 max open circuit voltage. My loss coefficient is around 15%. The DC voltage on the PV array is around 380 Volts max. My question is: can I add an...

You need to use SmartESS app

Hey, welcome back and thanks for the reply. I believe I found the cause behind my battery emptying during late night hours. I discovered a semi-short circuit due to a faulty temperature sensor installed on a water pipe. I was able to verify that the sensor was the reason for current leakage...

is this a new series? what is the difference between this and the REVO II ?

Thanks a lot. I will shoot him an email.