Hi all,
I have Seplos v2 with fw29 that I have been using for almost 2 years.
Recently changed the inverter to Deye and wanted to connect Seplos 2 it but cannot seem to make it work when the battery is set to Lithium.
Once CAN cable is connected Seplos would run for 5 secs start discharging and then shutdown and reboot. It constantly keeps looping like that.
Deye can see Soc, Voltage, Amps etc. Battery mode is set to 00 SHEnergy on Battery Monitor the protocol is Sofar.
When inverter is set to time charge from grid everything works as expected.
If I disconnect CAN cable and do not use Lithium but V(dump mode) everything works as expected.
Anyone has any ideas what is going on?
I have Seplos v2 with fw29 that I have been using for almost 2 years.
Recently changed the inverter to Deye and wanted to connect Seplos 2 it but cannot seem to make it work when the battery is set to Lithium.
Once CAN cable is connected Seplos would run for 5 secs start discharging and then shutdown and reboot. It constantly keeps looping like that.
Deye can see Soc, Voltage, Amps etc. Battery mode is set to 00 SHEnergy on Battery Monitor the protocol is Sofar.
When inverter is set to time charge from grid everything works as expected.
If I disconnect CAN cable and do not use Lithium but V(dump mode) everything works as expected.
Anyone has any ideas what is going on?