diy solar

diy solar

lvx6048 overloading

Your inverter can run that saw just fine. No question.
Now starting it? That's a while nother thing.
My 15A chop saw makes the garage light blink out for a moment every time I kick it on, and that is on grid power.
 
SparkyJJO said:
Your inverter can run that saw just fine. No question.
Now starting it? That's a while nother thing.
My 15A chop saw makes the garage light blink out for a moment every time I kick it on, and that is on grid power.
Click to expand...
Yeah, just talked to an electrician friend, he said to get a veriable frequency drive for it..The 15a motor is just a Lil to much. My 12a dust collector starts up but it make the inverter beep until it gets up to speed. Then it's no prob.
 
Michf1r3f1ght3r said:
2gauge (everything) batteries to bus bars ans bus bars to machine.
Click to expand...
Slightly undersized at max load depending what insulation rating you use.
Still shouldn't be causing the issue.
I'm out of ideas, I know my 10" Kobalt ran fine when I was cutting down stock making bus bars. That makes me think there is something wrong with it.
 
42OhmsPA said:
Slightly undersized at max load depending what insulation rating you use.
Still shouldn't be causing the issue.
I'm out of ideas, I know my 10" Kobalt ran fine when I was cutting down stock making bus bars. That makes me think there is something wrong with it.
Click to expand...
Ok time for bigger cables. Lol still prob gonna get a var freq thing also.
 
You must log in or register to reply here.

Similar threads

B
Growatt 3500 error 52 with SOK 48v 100ah
Replies
19
Views
260
marionw
M
D
EG4 6000ex unexpected overload fault code 07
Replies
21
Views
1K
Roadfool
R
J
Error 51 on Growatt Inverter
Replies
7
Views
144
Jonathan3900
J
R
Multiplus tripping 50 amp shore breaker plus error code 24: Switch-over system protection initiated
2
Replies
35
Views
1K
Partimewages
Partimewages
N
Error code 09 Help needed for voltronic inverter
Replies
0
Views
474
NSsolar
N

diy solar

diy solar
Back
Top