PortableAndru
New Member
I want to output from EcoFlow delta pro 3 to offgrid garage using garage’s offgrid service panel (not transfer switch, not interlock, not generator inlet box). Please describe cord, cable or wiring used to go from DP3 to a roughed in OFFGRID small service panel. I do not need solar suggestions at this time, just wiring help. I do not want to install an inlet box, if I can do this without one. This service will NEVER be grid-tied. Will be battery-powered only. Would prefer 240v, male plug to use with DP3’s interface/output receptacle. (EcoFlow support is offline until Monday 8 am)
I’m thinking 10/3 for 30 amp but struggling with connecting it to DIY Leviton 30A Angle Trailer Plug kit from Home Depot.
Thanks
Andrew
P.S. I was told to use the output interface in the attached photo and so I need help buying or building the wiring from that interface to my roughed in service panel.
I’m thinking 10/3 for 30 amp but struggling with connecting it to DIY Leviton 30A Angle Trailer Plug kit from Home Depot.
Thanks
Andrew
P.S. I was told to use the output interface in the attached photo and so I need help buying or building the wiring from that interface to my roughed in service panel.