bigjoncoop
New Member
- Joined
- Dec 27, 2019
- Messages
- 9
Hey,
I've been building large lithium batteries for quite some time now for myself, friends, and clients. (1kWh-15kWh)
At home I have a 10kWh 24v battery and a 6000w LF Split Phase inverter. Which I normally just used for emergency backup power during Hurricane Season etc...
I have a PowMr MPPT Solar Charge Controller rated at 60a @160v Max.
Yesterday I purchased 3- 130w panels.
There rated at 57.4v @2.25a
I'm assuming I should string the panels in parallel so I'll have 57.4v @ 7.25a.
Correct?
My goal obviously is to get the most out of the 3 panels to charge my battery as fast as possible...
I do realize that these 3 panels are no where near enough to for the size battery I have.
Below is the datasheet of the panels.
I've been building large lithium batteries for quite some time now for myself, friends, and clients. (1kWh-15kWh)
At home I have a 10kWh 24v battery and a 6000w LF Split Phase inverter. Which I normally just used for emergency backup power during Hurricane Season etc...
I have a PowMr MPPT Solar Charge Controller rated at 60a @160v Max.
Yesterday I purchased 3- 130w panels.
There rated at 57.4v @2.25a
I'm assuming I should string the panels in parallel so I'll have 57.4v @ 7.25a.
Correct?
My goal obviously is to get the most out of the 3 panels to charge my battery as fast as possible...
I do realize that these 3 panels are no where near enough to for the size battery I have.
Below is the datasheet of the panels.