Using the 3000EHV-48 and a single EG4-LifePower4 Lithium Battery | 48V
Not to beat the dead horse...
If I start with 3 of these panels (see below) in series with a total Voc 130VDC
I'm obviously concerned with the 120 operating spec of the EG4 inverter.
Production tolerance: ±3%
Maximum Power Current (Imp): 5.28A
Maximum Power Voltage (Vmp): 37.9V
Short Circuit Current (Isc): 5.56A
Open Circuit Voltage (Voc): 43.5V
I plan to add more panels down the line, but will this work to start my 48V system?
Thanks for the input and your knowledge in advance!
Not to beat the dead horse...
If I start with 3 of these panels (see below) in series with a total Voc 130VDC
I'm obviously concerned with the 120 operating spec of the EG4 inverter.
Model Type: SG-200WM
Peak Power (Pmax): 200WProduction tolerance: ±3%
Maximum Power Current (Imp): 5.28A
Maximum Power Voltage (Vmp): 37.9V
Short Circuit Current (Isc): 5.56A
Open Circuit Voltage (Voc): 43.5V
I plan to add more panels down the line, but will this work to start my 48V system?
Thanks for the input and your knowledge in advance!