Splitting hairs, I know but, using the 3000EHV-48 and (3) 43.5 Voc ?

[Aanon11]

Using the 3000EHV-48 and a single EG4-LifePower4 Lithium Battery | 48V
Not to beat the dead horse...
If I start with 3 of these panels (see below) in series with a total Voc 130VDC
I'm obviously concerned with the 120 operating spec of the EG4 inverter.

Model Type: SG-200WM​

Peak Power (Pmax): 200W
Production tolerance: ±3%
Maximum Power Current (Imp): 5.28A
Maximum Power Voltage (Vmp): 37.9V
Short Circuit Current (Isc): 5.56A
Open Circuit Voltage (Voc): 43.5V

I plan to add more panels down the line, but will this work to start my 48V system?
Thanks for the input and your knowledge in advance!

 

[mopat]

Minimum PV voltage is 120VDC, should work but another panel may be wise.

 

[Aanon11]

Thanks Mopat,
I really appreciate your answering my question.
Sincerely

 

[Mithril]

On that inverter does it simply stop accepting power below 120V input or is it more of a "it's less efficient"?

 

[Funion]

Add one more panel. Unless you have optimal panel orientation you will likely fall short of 120v. I have six 445w panels and they rarely get over 250v.

 

[Funion]

On that inverter does it simply stop accepting power below 120V input or is it more of a "it's less efficient"?

It will simply stop accepting power.