diy solar

diy solar

Settings epever upower 3000w lifepo4 settings

Lorenzo90

New Member
Joined
Nov 27, 2020
Messages
47
Hi,
I just managed to install an epever upower 3000w all in one inverter..

Could anyone share some settings for a 24v 8s lifepo4 battery bank?

Do anyone knows if there is an option to shut down the inverter while keeping the mppt inverter on?
 
Last edited:
If you press and hold the "ac" button. The right one, you turn off the inverter, not mppt.
 
Just wondering what mppt are you using as i have the lP3000-22-Plus (T) and don't really know if an epever mppt will talk to my inverter!?
Its a first install for me so I'm a right novice. I too have a 24v system running. The instructions don't tell me what the green plug in with screw terminals are for. I was guessing its for a temperature gauge plug but didn't come in the box so guessing that's a bummer as they want you to buy one. same as the bluetooth i think and its all adding up to lots of bucks. Im going to roll around the country in a conversion with an elderly lady so i need it to be reliable and have a good setup so thought it sensible to go with same make mppt/inverter.
 
Just wondering what mppt are you using as i have the lP3000-22-Plus (T) and don't really know if an epever mppt will talk to my inverter!?
Its a first install for me so I'm a right novice. I too have a 24v system running. The instructions don't tell me what the green plug in with screw terminals are for. I was guessing its for a temperature gauge plug but didn't come in the box so guessing that's a bummer as they want you to buy one. same as the bluetooth i think and its all adding up to lots of bucks. Im going to roll around the country in a conversion with an elderly lady so i need it to be reliable and have a good setup so thought it sensible to go with same make mppt/inverter.
Mine is an all in one unit. Mppt/inverter/AC charger/grid/battery switchover.
Sorry I can't help you, I'm not familiar with other products.
Try to write to helpdesk@epever.com
 
Back
Top