EG4 18kw- can it connect to 2, 200amp panels?

I am getting a 16kw system installed in the next couple of months. Plan on using the EG4 18kw inverter. I currently have 2, 200amp panels- will I need to put all loads that I want powered by battery on one of the panels or can it be connected to both service panels?

You can place the CTs at the meter and then place the backup 200A panel on the inverter wire box
this will ensure that the inverter supports both panels during normal use and provides backup for the other during an outage

SignatureSolarJames said:

You can place the CTs at the meter and then place the backup 200A panel on the inverter wire box
this will ensure that the inverter supports both panels during normal use and provides backup for the other during an outage

Click to expand...

This is exactly what I did for awhile before I rewired my sol-ark. I bought 600A CTs and installed them on the incoming service lines in the meter.