Search results

My batteries finally died, i am not willing to replace them, since my setup wont run noting major like a fridge or ac. It only provides a backup for the living room and tv and internet. What would be a fair price to sell (4) 100watt panels and a Ep Ever 4325bn charge controller and a 24V...

thanks i thought i had it set right i saw it went to float charge right as i was in the middle or dinner out. i used to have a tracer 4012an and had remote monitering set up. im glad it works with the new controller too.

both light just flash green slowly all the time it look like its chargeing. is this right

both light just flash green slowly all the time it look like its chargeing. is this right

currently have a damaged EPEVER 4012an the load os fried, the last one i had did the same too u had a 24 to 12 convereter fry and dead short the load at full PV power to the controller

yes you can destroy a EPEVER i had a 4210an that i damaged. The 24V to 12V converter hooked up on the load output failed and shorted out and dead shorted under full power and damaged the load control so it made a beeping noise when the PV was active as the same time the load was turned on...

it is voc im at 83V and 4 amps on a string in the best light conditions a string makes 330 watts at 072v mppt voltage and 14 amps. i got the battery charging voltage set at 28.8v. So the final is 28.8 at 14 amps on the battery per sting

im heavly looking at the Victron 100/30, it will be seeing the max amp with 2 strings of 4 100 watt panel or would it be best to get the 100/50, with about 1200 watts. Three strings of 4 100 watt panels. Each sting is in series

i need a new MPPT charge controller my Epever 4210an is defective this is the second one i tried and both was bad. Im getting a refund and want to get a controller that will work guaranteed. Im looking at a Victron or a 4215bn by Epever. Or should i bust the bank and go Outback. I will be...

a 5000 BTU A/C will use about 450 watts constant and about 800 watts on start-up, 800 watts of solar panels will average about 600 watts or more a hour and that is enough to run the AC and still give the batteries enough to charge.

i am in the process of gradually working to the point of running a 5,000 BTU AC during the day. It will take about 800 Watts of panels on a MPPT charger and about 200 amp hours of batteries. I am on a 24v system so if you are on a 12v system you would need more batteries, The inverter should be...

how you get 20 amps with 400 watts of panels. I have the same now with 2 gauge wire for inverter and 6 gauge the batt. and i'm using a. epever MPPT charger My panels are all in series making 83v and 4 amps going inside to the controller. After MPPT charging i see 29v at 14 amps.

just heard from them now

I have a issue with my charge controller and sent in a support ticker online from the website (#716 4012an). If has been a almost 5 days and no reply and when i look on the site for updates is still shows being processed on the status.

they are in series and are about 80 V at 5 amps

mc4 fuses will fit in the AGU fuse block. MC4 fuses and AGU fuses are the same length and diameter as each other. But a AGU fuse is rated at 12 Volts and the MC4 fuses has a 1000 VDC rating. Should i use the MC4 fuses? the 10 amp is what i understand,

im at a loss my current panel string fuses are 12V 10 anp AGU fuses. I dont think that is the right rating for my panel string. The string is make up of 4 100 watt solar panels rated at 5 amps at 83 volts each string. What is the right fuse to use on each string?

the wires for the panels to the combiner box till be less than 10 ft and the wire from the combiner box is 45 feet. then from the chatge controller 6 awg wire to the battery and from the battery to the inverter 2 awg a;; with fuses and breakers where needed

l one 10awg wire be enough from the panels in going to be running 3 stings of panels (each string is made up of 4 100 watt solar panels) making 83v and 5 amps per string

the free software that you download from the epever site the solar charge controller software 1.95 it also sends a screen capture of the desktop to my smartphone so i can asses the data anywhere i get cell service or wifi. It also requires a password to view

I just took the monitor up to my server computer running the EP Ever charge controller on the wall

Maybe citron is aiming for the car audio market. A it of the DC stuff we use is originally car audio anyway

this is cheaper than the smart dual battery isolater used in car audio and would work perfect for car amps and such. May give Victron another use for the product than RV and solar aplication

i use poe hardwired cams they are the most relable the one i found works the best is...

i dont fasten to the roof it is a flat roof with side walls the help shield the panels from wind. The mount system is very heavy so i has not moved at all in a windy Missouri winter. I just used wood screws to fasten the panel brackets to the wood. Is will be very strong and heavy.

i just stood up some 2x12s and 2x4s and fastened the panels to them it gave me the tilt i needed and was a easy mount. Makes a heavy panel mount.

.6 kilowatt or so this is a good day

(your only getting 2kw a day? I am getting 1.5kw a day and this is November and in Missouri< I only have 4 (100 watt HQST)) panels.

i will break it up if it is that big, the individual batteries are only a few hundred pounds. Something i can charge and use may bee 600 amh at 24v.

i think maybee agm, all i know now is they was changed recently and they are heavy industrial based to back up a really big plant, may be too much, for me: Be a good video to see Will charge them in a reasonable time frame.

i may get them in nor sure but i suspect about 50 or 60 percent capacity left in them for me to use but worth using

i am possibly given batteries used to back up a major manufacturer for a long time i have no idea how big the bank will be but i know it will be huge, im guesting a mega-watt of usable power. How much solar would be needed to charge the bank. i was told they are in reasonable shape even with...

Was built using car audio fuse box for amps. And a grounding bar for fuse boxes. Total cost less than 25 dollars