diy solar

diy solar

Search results

  1. C

    BMS protocol and read-out

    I have got the same problem, but if i use maximum charging voltage of 55.2V the alarms are only seldom and it is charging up to 99-100%. I think it needs some months until it is balancing the cells itself.
  2. C

    BMS protocol and read-out

    Yes, please share it. How old is the file? Christian
  3. C

    BMS protocol and read-out

    It still has to be researched and figured out how to use this BMS to get alarms from, charge cycle history and charge current control management (CCCM). I have two different batteries and one is readable, the other not out of unknown reasons, i am still testing. The readable one shows "DR-POWER"...
  4. C

    BMS protocol and read-out

    I think the SOC display is a bit buggy with these batterys, especially if a full cycle is a bit ago. You should ask your dealer if you have the latest firmware. With older firmwares there was also a bigger SOC-Jump. But even with latest software, I think its better to work with the voltages.
  5. C

    BMS protocol and read-out

    Hi, i developed a Script based on your code that can turn on switchable sockets if the SOC is high. I hope its OK i created a Github Project. https://github.com/christian1980nrw/DR-JC03-RS485-Switcher/tree/main Regards Christian
  6. C

    BMS Hardware Version DR-JC03

    Please ask your seller about the update to BMS firmware 2.0.0 I had the same problems with version 1.0.3.
  7. C

    BMS Hardware Version DR-JC03

    PM
  8. C

    BMS Hardware Version DR-JC03

    If the BMS is not showing the software version, you probably tried to install the wrong firmware or the seller sent you accidently the wrong file. In my case the seller installed a new bootloader first and after that the correct firmware. It was done by teamviewer. Since this BMS rescue...
  9. C

    Direct to water heating.

    It will take time because i have to build this first: Link Link2 I am collecting the things and start the projekt next year.
  10. C

    Direct to water heating.

    https://actii.pl/en/ladowarki-prostowniki/979-mpm-pwm-heater-charging-controller-for-solar-solar-panels-actii-ac7391-6931240073919.html
  11. C

    Direct to water heating.

    Hey guys, i was reading some of you are using the Actii Hot Water Controller together with the Photo Booster. I got mine today. If you look at the connectors of the Foto Booster, one side has a diode and one is without. Which side is in and which is out? Thanks.
Back
Top