Search results

Bought EBC-A40L I can get it to charger & discharger a cell, BUT I can't seem to figure out how to save the test I'm doing so I can look at it later when it is done not 3 am lol. Any help would be great. Tia.

ok

So lets just do the basics. If you disconnect your Lithium does the alternator go wacky?

You have a picture of your setup in the engine bay?

It should have a part that takes the 24v and splits down grades it to 12v. I will take a picture of my electrical bay later on today of my bus which is an MCI but similar to Prevost, and we can go from there. Ok!

I would say it is 24v.

Best bet phone prevost w/vin they will tell ya what voltage it is.

I purchased 16 cells from Docan Power through Amy in May of this year received them end of June I believe. Have tested all 16 I have 4 that are defective ( 2 really blotted and 2 others that are blotted but one bleu the vent and the second one wasn't far behind. I had to bring these 2 cells up...

Like the title says but here it goes. I have a JK-B2A24S15P that has 2 7mm wires for -B & 2 7mm for -P can it join the 2 -B and use just 1 terminal? Inquire minds would like to know.

Would have been nice to be warned not to change them. I'll try to get hold of 18650 Battery see what they say. It's been very trying to get through there tech support.

no swapping of passwords. the password I used is fairly generic to me

Good day people, I will try to keep this short. I purchased 3 JK Bms from 18650 Battery Store. 1 JKB1A8S209 and 2 JKB2A24S15P. I'm not sure which one or possible both JKB2A24A15P I'm having issues with. 1 I have renamed (inverter 1)but not changed password the other I have renamed (inverter 2)...

So mine is very close to that, the only difference is the cell ovp & ovpr I had mine higher will more than likely bring them a tad. What kind of RV do you have? Thanks for the info.

JK B2A24S15P

Have a RV that I'am changing batteries from AGM to Lithium. My inverter is 24v, charging w/shore power or Gen set no Solar yet. What would be everyone's recommendations on setting up the BMS?

Yes found it. Weird I tried a search in the forum nothing really came up, then did google search bang the april 2022 comment showed up. Thanks to everybody for your help.

Didn't see a push button. Will a 9v battery work as well?

Wow at least you got instructions. Lol. Thank you, I will try my supplier again to see if I have to do that.

The BMS I have is JK-B1A8S20P, was told once the sensing harness is attached it power's up and Bob's your uncle.

Good day folks. Having issues with a JK BMS that can be used as a 12v or 24v . I am trying to hook it up as a 12v 4s, I have put the sensing wires properly B- on negative of the pack and the P- to a charger but nothing. Am I going something wrong? Any help would be great!

Thanks Chris. I already have 12v charger so going to stick with it I guess. I'm trying to find your battery case build in here and for the like of me can't find. Can you send me a link please & thanks.

I'am building a 24v system for my are rv is it possible to charge the pack with 12v charger w/o dismantling the 24v pack into 12v?

Looking for a bms 24v 150a with blue tooth sold in the Canada or the USA. I'm build my battery from scratch have a container for by cells but need to fill a cavity thats about 7" thick and about 2' long. Any help would be great. Tia

Yes alot of shunts!

Not sure yet. I have 24v system going to parallel second battery to it and what to keep an I on it.

Will this shunt do 2 batteries like the Victron?

Tried that, not working still get same screen. Will send a email to the company to see if they have any suggestions.

Tried selecting the parameter tab but it's not highlighted so won't work. I'll try tomorrow to uninstall and reinstall! Will keep you posted. Thanks.

so this is a screen shot of the bms

Good day folks. I know I'm not the sharpest knife in the drawer but, having issues with Vnsznr/Daly smart Bms it 4s 12v 100a. Not sure if I'm doing this right but I've hooked up the bms, checked my connections w/ dvm everything adds up. I have down loaded the app the app sees my b/t #, but I...

If you can go to Facebook look on Prevost bus, there is a gentleman named Aaron that put in a system similar that you want to do. He is also on Youtube under Camp Prevost.

Is the 8s still available?

Yes would like fire proof materials inside of box.

The reason I asked need to make 4 battery boxes for my rv. I want to build my batteries, instead of store bought. If you have any tips I would really appreciate it. Thank you for the information

Chris would starboard be next step up from plexiglass for strength?