diy solar

diy solar

Search results

  1. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    Alrighty, that fixed it! Thanks Folks!
  2. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    Ok! Thank you very much!
  3. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    Ok! give me several minutes BTW THANK YOU SO MUCH for your help!
  4. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    No sir. there is nothing connected to the b- side of the shunt except the terminal
  5. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    I had originally had my shunt p+ wire connected to the main p+ output of battery bank with same result.
  6. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    Correct they are wired in parallel 12v. I am aware that the shunt is connected properly to the negative terminal with the p- of the shunt attaching to all of my power out, and the b- of the shunt connecting to the negative terminal of the battery.
  7. B

    AiLi half of current reading, and capacity with 200ah battery bank.

    Hello. The problem is with the AiLi Battery Capacity Monitor. It seems to only be reading half of the amp inputs, and outputs, as well as capacity. For example: There is a 10 amp draw/load on a 100ah battery. The monitor reads it as 10amps. (perfectly fine), but as a 2x100ah battery bank (200ah)...
Back
Top