Search results

Almost 1 year later...now i try to connect te bms to my homeassistant (rs485). My growatt inverter readings works (esphome - rs485) I tried with the seplos Yaml config without results... anyone with suggestions? (Modbus adress in normal 0x00) thanks

Does anyone know if there is a way to change the standard information. Now I see the voltages. I like to see the panel power with the batteries percentage directly (not push every times the bottoms to see that information.

I fixed out. I live in Belgium, so my language is Dutch. I set my computer to the English language and the problem was solved. Works like a charm now the second one is on the way.

Greetings from Belgium, I decided to go to I diy Eel - Seplos battery. With the Eve 305ah cells. 15kw for about 3000€.

If someone seen this before, any help would be greatly appreciate. I try to setup a Eel battery diy box with EVE 305 cells. A certain readings on the software are 1000x to much. Can it be something to do with the calibrating values? I have not changed anything yet except the battery capacity and...

This enplanes when I increase the load the efficiencies are a lot better, is this only a growatt issue? I have bought a second one a while ago, still new, so I'm going to do some test on this one in another environment and playing with some settings.

I am reinstalling my system because i will install my own diy battery to my Growatt, but my battery is not finished yet. I have connected the inverter input to the grid and the output to my home loads. I Measured (at night) with a clamp ampere meter to the input and measure around 3 amp...

Agree but can you also explain why i measure almost the double of it (input - output) there is also a VA power reading on the growatt so....

Can someone confirm this?... I am reinstalling my system because i will install my own diy battery to my Growatt, but my battery is not finished yet. I have connected the inverter input to the grid and the output to my home loads. I Measured (at night) with a clamp ampere meter to the input and...

I suspect it might be possible to feed the AC output of one converter into the input of a second converter.

:unsure:I've been googling for days and annoyed why we here in Europe have to pay an average of 500€ more for a 48v rack battery compared to the prices in the United States.

All new spf5000 inverters (from 2022) have different chips in their hardware (due to the worldwide chip shortage) than their predecessor (2021). You cannot recognize these visually, only through the firmware. If this firmware is higher than 040, then you are dealing with a newer version that is...