Search results

oooOOO!! yes! here's to hoping you like what you print.

@bryn Yeah my stud to edge is 25.4mm and below in the image is the dimensions looks like your design is what i need.

@bryn When your done do you think you could share your design? Looks like you have the same issue with the studs being out closer to the edge as I do. I would redesign myself but son is the one with the printer and I can only ask him to print and not to take his time adjusting for me. But this...

This is the link I bought mine for $150ea from Jenny Wu from Docan. I got mine in 7days! https://m.alibaba.com/product/1600407171889/Docan-Tech-EV-LF280K-6000-cycles.html? Send inquiry and ask if they have the 280ah at the Texas Warehouse. I have noticed ppl adding a BMS to their order.

If you can find someone with a 3D printer this guy is sharing his box build with the same specs as you have. 304ah cells with a 200a JBD BMS. I would look into it Thread 'Battery(300) Design Open Sourced' https://diysolarforum.com/threads/battery-300-design-open-sourced.34832/

heres a picture of me testing the inverter before installing it under my fridge

This is the vendor I purchased mine from. it showed up in California in 3 weeks. https://www.aliexpress.com/item/1005003898507186.html?spm=a2g0o.store_pc_groupList.8148356.46.5e244789dw3Pyt

Right, that's the parameter we changed we set it to 26mm. We got some errors, the walls of the case disappeared and the nubs that the lid sit on didn't change. My terminals might just be too far apart for the design to accommodate for.

Ran into a snag. My terminals are too wide changing the parameters completing messes up the case parameters. My terminals are 25.4 mm from stud center to edge

My giandel 2200w inverter draws about 1.5-2.0amp from battery on standby, around 22watts

Son got one of the cell holders printed. Now to take the battery apart to see how it fits.

What exactly happens when you crank your generator? I have a battery I built with 150 amp BMS which has no trouble turning over my Onan 4K. Which 100 amp hour battery did you buy? When the current from the alternator turns off then you will not have back feed through the dc2dc, it's a one-way...

Will who is an Admin on these forums makes videos. Here's one that will help you on your decision for a inverter

Current connected has the JBD 150a in stock looks like, otherwise you can get it in the other link on I posted from China and hope it gets to you in a timely manner https://www.currentconnected.com/product/jbd/ Overkill has the 120a model only

Not sure I would budget on the BMS. You would want a quality BMS for you investment.. NO? Am I being a jerk?

I would say that you are making your own battery why would you not want to have a Bluetooth BMS? I love being able to control the charging and the discharging on my new battery I built. I'm in love with the functions it gives me. I know about the DC2DC charger..it hurt me to spend the money on...

not sure this will help, but this is what I did which now has disabled my Emergency switch. I dont want my lead and lifepo4 tied together. I pulled my battery and house supply off the solenoid post Buty then I noticed the solenoid was very hot to the touch so I disconnected the small wire that...

Yeah this mobile inverter stuff made my head hurt all day. Not sure if there is a inverter that has a terminal block with a neutral ground bond that I have found. I would return this and get it of someone has a recommend. I did watch a grounding video Will mentioned in his inverter video...

Let me ask you this. I see all over the internet's people just unplugging from shore power and plugging into the inverter and turning off the charger. Everyone says that's fine and never mention anything about neutral bonding issues. Are they maybe potentially creating a safety hazard like me?

Heading to work... When I get home I will read this 30 times to wrap my head around it and get back to you. How much do I owe you?

Yes, my transfer switch isolates the inverter line and neutral. When on gen/shore power it connects to the AC panel. When not detecting shore/generator power then it switches to inverter power. Sounds like I still should see if my neutral is bonded or not. Am I saying that right?

I've been thinking and thinking ? Does this really apply to me since I never explained my situation. I have a RV which will always be off grid unless I start the generator or plug in shore pwr in which that case I have a transfer switch that never lets the inverter touch the outside grid. If...

Okay " lamp" this slang is going to kill me. Haha I will find something to rig up to make this simple test lamp. Thanks guys for the concern and help

Yikes! I'm in way over my head. What is a "incandeacent Iam?

Okay. I will find out but I'm dumb and don't understand this " Can be bonded to the safety ground or not" Is this something I can do with a meter? Sorry I'm a idiot when it comes to this. If you say connect this to this I can do that. Lol.

They match..but here's my head scratcher When I test the line and neutral together I get 120v. When I test the line and ground I get 66v I test the neutral and the ground I get 54v Why is that? These measurements are at the inverter terminal block. Shouldn't I get 120v from the line to the...

to answer my own question I went with the Giandel with the terminal block (& 3 yr warranty). Looks like I can draw more watts out of the block then just out of the single socket.

Yeah he's a wiz with the printer. Made me a RV bathroom cabinet latch that broke He printed one from scratch. I'll post the progress when we get something

Son is printing the first cell housing now and will bring it over this weekend to see if we need to do any adjustments. This is going to be a long time in the making since we only see him on the weekends.

https://www.amazon.com/gp/product/B07ZNTXN7P/ref=ox_sc_saved_title_1?smid=A1SK9IS6JDBCLC&th=1 Actually I guess I'll pull the trigger on the link above tomorrow unless someone says I can use the outlet on the back of the plugin type inverter to power my panel. I'll be using a transfer switch...

Good Point! Alot easier to add spacers if my pack is smaller. Son was telling me the thing he was worried about was that if he had to stretch or shorten it it might skew the holes for the rods and or the screws

Thanks ..I'll just have to do some actual measuring instead of just thinking about it. My son is the 3D printing guy and he said this is very doable and looking forward to me getting the measurements for him. We might be doing a Renogy type color scheme

Looking at a 2000w inverter and the two I'm looking at are the GIANDEL 2200W Pure Sine Wave and the WZRELB Reliable 2000W Pure Sine one has a terminal block for high power appliances plus two standard US plug in's The other has only two standard US plugs Question: Using a heavy extension...

What are they size of your 304ah batteries? Are they not the same size as the eve 280ah?

OMG! Just sent 3d printing enthusiast son the link to tweak your work for my 280ah and 150 JBD...Bye Bye Plywood!!!