Search results

I hv a cable 35mm from battery pack to inverter its 4mts long. I kept it long so that I can move the pack when I want.

I tried toman mccb but that was 160A gave the same result. I do have a fuse 250A. Not sure if it's a class T fuse though.

Inverter is programmed to change if pull from battery pack is over 150A but it don't change.when the load is on my ac side amps shows 15.2A @240v so that's about 3,648W so if I convert that to dc it's about (3648/48) x 1.25 x 1.25 = 118.75A dc with all ineffecency.

No it's a 48V. Wire size is 35mm

Hi, I have an mccb which is in between my battery pack and hybrid inverter. When I am tring to use my hotwater the mccb keeps tripping from inside. The lever don't fall but it's trip bcz I get an error on my inverter. Inverter is 5000W Mccb 250A Hot water is 3500W. Also I noticed if I on 2...

Thanks alot.

Do u have an image for bidirectional would be very helpful.

U mean this diagram.

I dont know of anyone is looking at this as its an old thread. Do u think those small numbers mean something the 1-2, 3-4 I see that in some mcb it is as 1-3, 2-4 I assume the latter is bidirectional. But if someone with more knowledge could tell.

Does it work with solar assistant alone without home assistant. Bcz I hv not linked it with home Assistant.

My issue don't seems to be from SA but EASUN. There inverters don't seem to allow to charge parameters from another form other than directly on the inverter. SA n my inverters r showing different values when it comes to PV close to about 500W. This is what I asked them but there is no response...

I dont think it's a problem with SA but from EASUN n there cheap inverters. I am tring to change it using the USB B cable they have send me. I tried using the computer with solar power also but couldn't change any settings.

Directly on the inverter I can. But I want to be able to change the mode from grid to solar. I have seen that many can control there system parameters from SA remotely. Also when it can be done its piece of mind.

Yeah but I have an issue my inverter n SA r showing 2 different figures on PV about 500W difference. My other issue is I can't change any settings in my inverter. Unfortunately EASUN n SA both r not responding. I think every should be away from EASUN there customer service n warranty are worthless.

Yeah they also seems to not reply any emails.

I got one more problem. I am unable to change any setting in my EASUN inverter through solar assistant. It gives me errors and don't allow to change. EASUN is hopeless with there customer service dont even reply.

Unfortunately no. But we could let it slow charge n hope that the balance would balance it.

I dont get these colours. How do I activate it. But would have loved to see individual voltages n the balancing.

Hi I got a question. Is there a possibility to see individual cells and there charge current using solar assistant and daly bms.

Is there an app or something which can be installed to view the details using louis system.

Is there an app which can be installed to view the details from the phone.